A chair that looks sleek and luxurious in the showroom can already show cracks, creases or colour differences after a year of heavy use. That is why a proper faux leather quality assessment goes beyond colour, price and thickness alone. The right choice depends on where and how the material will be used: a dining chair at home has different demands from restaurant seating, a campervan interior or a treatment couch.
Faux leather is a versatile upholstery material. It is easy to maintain, often highly stain-resistant and available in a wide range of textures and colours. But there are big differences between qualities. With these seven points, you can assess faux leather the way an upholsterer does.
Assessing faux leather quality starts with the application
First, decide what the piece of furniture needs to withstand. For a decorative cushion, wall panel or a chair that is rarely used, faux leather does not need the same technical performance as for a family sofa. If you expect children, pets or intensive daily use, you are better off choosing a hard-wearing quality with a strong top layer and a stable backing.
The room matters too. In a kitchen or waiting area, ease of cleaning and stain resistance are often decisive. In a campervan, boat or car, the material has to cope with temperature changes, sunlight and plenty of movement. For hospitality, healthcare and contract interiors, there may also be requirements regarding flame retardancy, disinfection or specific cleaning agents.
A higher price therefore does not automatically mean a faux leather is better for every project. A supple, luxurious quality can be perfect for an elegant armchair, whereas a sturdier contract-grade faux leather is the wiser choice for bar stools in a busy venue.
1. Look at abrasion resistance, but read the figure carefully
Abrasion resistance for upholstery is often expressed in Martindale. This test measures how many rubbing cycles a material can endure before visible wear appears. The higher the figure, the better the faux leather generally stands up to daily use.
For normal domestic use, a decent Martindale rating is usually sufficient. For intensive use, such as dining chairs used several times a day or commercial seating, a higher rating is a sensible choice. Yet Martindale does not tell the whole story. The test mainly measures wear from friction, not how the material reacts to sharp claws, a belt buckle, incorrect cleaning or prolonged heat.
So always consider abrasion resistance together with the rest of the product specifications. A good rating is valuable, but it is not a licence for every use.
2. Assess the top layer and texture
The visible face determines not only the look but also a large part of the practical performance. Faux leather can have a smooth, matt, nubuck-like, vintage or distinctly leather-like finish. A fine grain often looks more natural, while a smooth texture is usually easier to clean.
Pay particular attention to how the top layer feels when you bend the material. With a good quality, the surface stays calm and elastic. With less suitable faux leather, hard fold lines can quickly appear or the coating can look strained. Don't stretch a sample to the extreme; bend it a few times and look at it from different angles.
A very soft top layer feels comfortable but can be more prone to pressure marks and scratches. A firmer coating is often more practical for intensive use, although it may drape less smoothly on furniture with lots of curves. That is not a flaw, but a trade-off between comfort, appearance and lifespan.
3. The backing determines how well faux leather handles
The back of faux leather deserves at least as much attention as the face. The backing or substrate gives the material its dimensional stability, stretch and workability. Many faux leathers have a textile backing, but its weight, density and flexibility vary considerably.
For taut seats, straight panels and large surfaces, a stable backing is helpful. The material holds its tension better and shifts less during upholstering. For rounded armrests, tub chairs and complex shapes, on the other hand, you need sufficient stretch. Faux leather that is too stiff may then crease, while material that is too stretchy can slacken over time.
Also check whether the backing is strong enough for stapling and, if needed, sewing. This is especially important when reupholstering: an old chair frame sometimes requires a lot of pulling force when tensioning. A professional material must be able to handle this without the staples tearing out or the coating coming loose.
4. Thickness and weight say something, but not everything
Thicker faux leather is often automatically seen as better faux leather. That is understandable, but not always true. Thickness can contribute to a full, robust look and greater resistance to damage. At the same time, a thick quality can be too stiff for fine work or deep buttoning.
The weight per square metre often gives a more realistic picture of the overall construction. A heavier material generally has a sturdier backing and/or coating, but here too the composition remains decisive. A lightweight quality can be excellent for wall coverings or decorative applications, while a heavy contract-grade faux leather can look bulky on a small vintage chair.
So don't just ask yourself: how thick is it? Above all, ask: do the thickness, suppleness and stability suit my furniture and technique? For DIY upholsterers, that one question saves a great deal of frustration when pleating, stapling and finishing.
5. Pay attention to stretch, tear strength and flex behaviour
Faux leather is under constant strain where people sit, turn or get up. The front edge of a seat, corners and seams in particular take a lot of punishment. Stretch and tear strength are therefore important properties, especially for furniture used every day.
A material with controlled stretch moulds neatly around soft foam layers without immediately going slack. Too little stretch makes it harder to achieve a neat, crease-free finish. Too much stretch can cause a seat to look less taut over time. A good upholstery quality usually offers a workable balance between these two properties.
Also try bending the sample with the top layer facing outwards. Small, temporary fold lines are not always a problem. Permanent white crack lines, a hard kink or a coating that visibly opens up, however, are a warning sign for an application involving a lot of movement.
6. Check care requirements and resistance to everyday use
A faux leather can be technically strong yet still less suitable if it is difficult to keep clean. So take a look at the recommended care. In many cases, a soft cloth with lukewarm water and a mild, suitable cleaner is all you need. Aggressive degreasers, solvents, scouring pads and products containing bleach can damage the top layer.
For families, hospitality and healthcare settings, it is wise to check in advance which stains and cleaning agents the material must tolerate. Think of grease, coffee, sun cream, disinfectants or dye transfer from clothing. Don't leave spills to sit for long, even on quality faux leather. Quick, gentle cleaning visibly extends its lifespan.
Colour fastness is also relevant for furniture near large windows. Direct sunlight can affect any upholstery material. A chair in a sunny conservatory therefore calls for a different assessment than a pouffe in a dark bedroom. For outdoor use, standard upholstery faux leather is generally not the right choice, unless it has been specifically developed for that purpose.
7. Compare samples on the actual piece of furniture
A product photo helps with the initial selection, but a sample tells you far more. Colour changes with daylight, artificial light and the colour of your floor and surrounding walls. The texture can also look finer or coarser on a small screen than it really is.
Place the sample on the furniture and look at it at different times of day. Feel the grip, fold it gently and hold it next to wood, metal or other fabrics in the room. If in doubt, order two or three colours that are close to one another. That is far more reliable than choosing based on how it looks on screen.
For professionals, it is also wise to use the same quality consistently for recurring projects. That way you know how it behaves during cutting, sewing and tensioning, and you know exactly what you can promise your client.
When is faux leather of good quality?
Good faux leather is not necessarily the thickest, most expensive or softest material. It is faux leather whose properties suit the project. For a heavily used dining chair, you are looking for abrasion resistance, a stable backing and easy maintenance. For a rounded designer armchair, suppleness and good flex behaviour may carry more weight. For campervans and commercial interiors, resistance to frequent use, temperature changes and cleaning is often decisive.
At BLADI Meubelstoffen you will find faux leather in a wide range of textures and qualities, so you can choose based on the application rather than looks alone. Use samples to compare, read the technical properties and ask for advice when the load or the upholstery work places extra demands on the material.
The best choice doesn't just feel good in your hand. It also stays taut, attractive and practical once the furniture is actually being used.