Short answer: On parquet, laminate, vinyl and tiles, choose felt; on carpet, a glide nail slides better. Pick a size slightly smaller than the contact surface of your furniture leg. For chairs that are moved often, choose felt pads with Power adhesive, felt nails or luxury screw-in felt glides, so that they stay in place.
- Self-adhesive anti-scratch felt comes in rounds from ø18 to ø35 mm, squares of 25 x 25 mm and sheets of 75 x 100 mm.
- Felt nails and glide nails are hammered into a wooden leg; luxury felt glides are screwed in.
- You will find all sizes and versions in the felt collection.
Scratches on your parquet, a chair that scrapes every time you pull it up, or a table that judders across the tiles: with the right felt pads you can solve it quickly. At Bladi you will find self-adhesive anti-scratch felt, felt glides with an extra-strong adhesive layer, luxury felt glides with a screw, felt nails, glide nails, cut-to-size felt sheets and anti-slip rubber. Most items are made by Verlofix. In this article you will read which type suits your floor and furniture, and how to choose the right size.
What kind of floor do you have?
The floor determines the material. On parquet, laminate, vinyl and tiles you use felt: it protects the floor against scratches and dampens the noise when you pull up a chair. On carpet and fitted carpet, a glide nail slides better. A plastic or steel glide nail lets the furniture move smoothly instead of catching or scuffing.
Does a piece of furniture need to stay put, such as a stool or a step on tiles? Then choose self-adhesive anti-slip rubber. The rubber stops anything from sliding, protects the surface against scratches and absorbs vibrations.
Which type of felt pad should you choose?
Self-adhesive anti-scratch felt
The simplest felt pad sticks directly under the leg. You can choose white or brown, rounds from ø18 to ø35 mm, squares of 25 x 25 mm or a sheet of 75 x 100 mm. It fits under side tables, stools and the feet of a light cabinet, as well as under a plant pot or fruit bowl. For legs that are not round, such as rectangular plinths or curved feet, cut your own shape from a self-adhesive felt sheet of 150 x 200 mm.
Felt glides with Power adhesive
On chairs and tables that are moved often, standard felt pads can come loose quickly. The felt glide with Power adhesive has Verlofix’s extra-strong adhesive layer. You can choose white or brown, from ø24 to ø40 mm. A pack of 16 is enough for a set of four chairs.
Felt nails
Felt nails have a nylon base with felt and a nail that you hammer into the wooden leg. As a result they stay in place even in busy spaces where chairs slide across the tiles countless times a day. They come in brown and white, in ø20, ø24 and ø30 mm. If you are tackling many chairs at once or work as an upholsterer, there is a tub of 80 brown felt nails of ø24 mm: enough for twenty four-legged chairs.
Luxury felt glides with a screw
The luxury chrome felt glide with a screw is screwed in rather than stuck on, so it does not shift or fall off. The chrome cap shines under the leg and the felt protects the floor. You can choose ø20, ø25 or ø30 mm. With hardwood, drill a pilot hole first so the wood does not split when you screw it in.
Glide nails
Glide nails are available in white plastic (ø20, ø25 and ø30 mm, in packs of 4 or 100) and in nickel-plated steel. They slide easily over carpet and fitted carpet and prevent wear marks. If you need grip instead, there is also a galvanised steel glide nail with a rubber buffer: the rubber provides grip and prevents the hard tapping of a leg on tiles or floorboards. Always tap a glide nail in straight, so that the head sits flat on the floor and wears evenly.
What size felt pad do you need?
Measure the underside of your furniture leg and choose a size slightly smaller than the contact surface. That way the felt does not stick out and stays neatly in place. As a guide:
- ø18–22 mm: slim legs, stools, side tables and small feet.
- ø24–25 mm: the middle size for standard dining, kitchen and office chairs.
- ø28–30 mm: wider chair legs and cabinet legs.
- ø35–40 mm: the largest sizes, for wide legs.
Does your furniture have tubular legs? For those there are furniture leg caps and tube inserts.
White or brown felt?
Brown felt disappears under oak, walnut or black-stained legs. White felt is barely noticeable under light and white-lacquered furniture. That way nobody can see there is a glide underneath.
How to fit felt pads properly
- Make sure the underside of the leg is clean, dry and free of grease.
- Stick the felt pad in the centre of the contact surface and press it firmly for a moment.
- Hammer felt nails and glide nails in straight and check that all legs are the same height.
- With hardwood, drill a pilot hole before screwing in a screw-in felt glide.
Want to replace the legs themselves? Then read our article on choosing furniture legs.
Frequently asked questions
Which felt pads stay on best?
Felt nails and luxury felt glides with a screw are fixed into the leg and stay in place even when the chair is pulled up every day. If you prefer to stick them on, choose felt glides with Power adhesive.
Do felt pads work on carpet?
On carpet and fitted carpet, a glide nail slides better than felt. Use felt on parquet, laminate, vinyl and tiles.
How many felt pads do I need?
Allow one glide per leg. A pack of 16 is enough for four chairs; with a tub of 80 felt nails you can fit twenty chairs.
Not sure about the right size or fixing? Send us a photo of your furniture leg via WhatsApp, order online from Bladi or visit our showroom at Boomsesteenweg 947C, 2610 Wilrijk (Antwerp).