A chair with a worn seat, a sofa whose fabric has faded or a family heirloom with a beautiful shape: with the right upholstery, a piece of furniture can last for many more years. This furniture upholstery guide helps you choose not just an attractive fabric, but above all a material that suits the construction of your furniture, everyday wear and the way you like to work.
Reupholstering is not simply a matter of pulling a piece of fabric over a piece of furniture. The base layer, padding, tension and finish together determine whether the result is taut, comfortable and durable. If you assess these elements properly beforehand, you avoid disappointment and unnecessary waste of material.
Start with the condition of the furniture
Before you look at colours, textures or patterns, check the basics. A sturdy wooden or metal frame is a good starting point. Are the legs wobbly, have joints come loose or is the frame damaged? Repair that first. New upholstery fabric can completely transform the look of a piece of furniture, but it will not fix a weak frame.
You will find a wide choice of fabrics in the interior and upholstery fabrics collection; staples and staple guns are in the staple gun and staples collection.
On an existing piece, remove the old covering carefully. The old fabric often makes an excellent template for the new fabric. While stripping it, take photos of the corners, pleats, seams and the order of the layers. Also keep pieces of card, pull strips or piping if you are unsure about the original finish.
Pay particular attention to the padding. Foam that crumbles, stays dented or has lost its springiness is best replaced straight away. For a seat, the quality and density of the foam determine the seating comfort. A layer of dacron around the foam softens the shape, makes sharp edges less visible and helps the fabric glide nicely while you upholster.
Choose upholstery fabric for use, not just colour
A light bouclé can look stunning on a bedroom armchair, but it has different demands from the fabric on a family sofa that is used every day for eating, playing and relaxing. The best choice therefore starts with one honest question: how intensively will this piece of furniture be used?
For everyday use: hard-wearing and practical
For sofas, dining chairs and hospitality furniture, a strong upholstery fabric is essential. Look at abrasion resistance, weave structure and ease of care. Coarsely woven fabrics have plenty of character, but can be more prone to snagging from pets or sharp details on clothing. A tightly woven fabric is often more practical for heavy use.
Chenille feels soft and comfortable and gives sofas a warm look. Velvet looks luxurious and subtly changes colour depending on the direction of the pile. Corduroy adds texture and a distinctly retro feel. Every type of fabric has its own look, but also its own usage profile. So don’t just ask which fabric is the most beautiful, but also which one best suits your household.
Do you have children or pets? Then preferably choose a fabric that is easy to keep clean and stands up to frequent use. Water-repellent or pet-friendly qualities can be a sensible choice. They will not make a piece of furniture indestructible, but they do give you more time to deal with spills or dirt.
For projects with a sleek finish
Faux leather and leatherette are popular for dining chairs, bar stools, headboards, campervans and commercial interiors. They are generally easy to wipe clean and give a sleek, modern finish. At the same time, not every quality of faux leather is suitable for every application. With heavy use, flexibility matters, especially in places under a lot of tension, such as the edge of a seat.
For furniture with curves, deep buttons or sharp corners, stretch is at least as important as colour. A stiff woven fabric can look beautiful on a flat panel, but be harder to work on a tub chair. So always check the direction of stretch and consider how the fabric needs to run over the frame.
How to calculate how much fabric you need
The amount you need depends on more than the dimensions of the furniture. The width of the fabric, the height of the backrest, loose cushions, armrests, a pattern and the finish you want all play a part. Measure each part separately and note the length, width and height. Add enough extra for turnings, mistakes, seams and any pattern matching.
With a plain fabric you will have less cutting waste than with a large check, stripe or print. A pattern needs to flow neatly from seat to back, and sometimes even from one cushion to the next. This can push up the amount you use considerably. Stripes also need attention to direction: a vertical stripe on the backrest has a different effect from a horizontal one.
If in doubt, buying a little too much is safer than ending up just short. A dye lot or production batch may differ later on, so an extra metre bought afterwards will not always match exactly. For professional projects or complex furniture, a fabric sample and an accurate calculation beforehand are not a luxury but a smart step.
The tools that really make the job easier
Good tools make the difference between an upholstery job that drags on and a finish you are proud of. For most projects, besides the fabric, you need at least a strong staple gun, suitable staples, a staple remover, sharp scissors or a rotary cutter, measuring tools and a marking pencil.
Are you working with thicker upholstery fabrics, several layers of dacron or faux leather? Then the length and strength of the staples are all the more important. Staples that are too short do not grip enough. Staples that are too long can show through on the underside or even damage the frame. Always test first in an inconspicuous spot or on an offcut of wood.
For a neat edge finish, you can work with piping, decorative nails, cord or furniture braid. This is not just decorative. On certain pieces, piping also helps to neatly conceal staples or the transition between two parts. Only use glue where it really adds value, for example with thin layers of dacron or a finishing braid. Too much glue makes corrections difficult and can show through thin fabrics.
Upholstering in the right order
The most common mistake in furniture upholstery is stapling permanently too early. So always start by positioning. Lay the fabric on the furniture, determine the direction of the pile and check that any pattern runs straight. Then fix it at four points first: centre front, centre back and on both sides. Only once everything is neatly aligned do you work from the centre out towards the corners.
Pull the fabric firmly enough for a smooth result, but not so tight that seams pull, the texture distorts or the padding is compressed. On a seat, you often work in small steps, switching sides each time. That way you spread the tension evenly.
Corners take patience. Never cut away large pieces straight away. Fold first as a trial, see where the fabric becomes thick and then make small, controlled snips. With thick fabrics, a corner can quickly become bulky. Sometimes a subtle pleat on the underside is neater and stronger than a corner forced flat.
Common problems and how to solve them
Wrinkles usually appear because of uneven tension or because the fabric was not worked from the centre. In that case, remove a few staples and re-tension. Don’t wait until the whole piece is finished, because putting it right will then take much more time.
Can you see sharp foam edges through the fabric? Add a layer of dacron. If a seat sags quickly, new fabric alone is not enough and the padding or springs need to be assessed. Is a pattern running crooked? Correct it straight away at the first fixing points, not at the very end.
The underside deserves attention too. A neat dust cover protects the construction from dust and makes the furniture look well finished from every angle. On chairs and sofas, this is a small extra step with a strikingly professional effect.
When to do it yourself and when to outsource?
A drop-in chair seat, a footstool or a straight sofa cushion is perfectly achievable for a handy DIYer. You quickly learn how fabric behaves, how much tension is needed and how to build up corners. An armchair with springs, deep buttoning, curved back sections or complicated seams calls for considerably more experience.
That does not mean you should avoid such a project. It is, however, wise to be honest about the time, the tools and the end result you want. Sometimes upholstering it yourself is the best choice because you enjoy the craft. Sometimes a professional upholsterer is the wiser option, while you select the fabric, padding and finish yourself.
If you want to feel materials beforehand and judge colours in your own space, it is a good idea to compare samples first. At BLADI Meubelstoffen you will find a wide choice of upholstery fabrics, faux leather and professional upholstery supplies for small repairs and complete projects.
Above all, take your time over the preparation. A well-chosen fabric, a sturdy base layer and carefully placed staples turn a worn piece of furniture not into a temporary refresh, but once again into a familiar spot in your home.